SAVINGS View Now ×
All Articles on Driving Tips

When Should You Replace Winter Tires?

If you’ve had your winter tires for a couple of seasons, this year you might be wondering if there’s enough tread depth left for them to do their job: push away slush and snow, bite ice and hold corners on slippery roads.

Winter tires are workhorses, and the more tread depth you have, the better they’re able to perform. At what tread depth do they start to lose their ability to brake and corner well on snow and ice? When should winter tires be replaced? And how do you check tread depth anyway?

Let’s begin.

HOW AND WHEN WEAR AFFECTS WINTER TIRE PERFORMANCE

In 2016, Kal’s Tire Testing set out to learn exactly how tire wear affects safety performance and handling. The independent testers evaluated the performance of four tire categories (premium winter, economy winter, all-weather, and all-seasons) at five tread wear levels—from new all the way to 100 percent worn—and through four tests: ice and snow cornering, and ice and snow braking.

In this post, we’re going to focus on the two winter tires (but be sure to read our post What You Need to Know About Worn Tires In Winter for the full breakdown of what we learned across categories).

Here’s a graphic that illustrates how ice braking and snow cornering performance changed at each wear level.

kal-tire-infographic-icesnowcornering-how-safe-are-worn-tires

Take a closer look at what happened from 50 percent wear to 75 percent wear. Even for the premium winter tire, stopping distance increased by 3 metres. For the economy tire, it took nearly 5 m longer to stop.

Braking performance declines significantly between 50 and 75 percent wear. 

Why? Winter tires feature an aggressive tread pattern designed to bite into snow and push away slush. The rubber compound is also designed to stay soft in cold temperatures for reliable grip in at 7 C and below. The more worn down a tread is, the smaller its biting edges.

WHEN SHOULD YOU REPLACE WINTER TIRES?  

Given what we found out about what happens to tires when between 50 and 75 percent wear, what we say is, For reliable braking and cornering performance on snow and ice, replace winter tires when they’re half worn.

  1. Brand new – 12/32”
  2. 25 percent worn – 9.5/32”
  3. 50 percent worn – 7/32” REPLACE TIRES
  4. 75 percent worn – 4.5/32”
  5. 100 percent worn – 2/32”

Transport Canada says tires worn close to 5/32” (4 millimetres) should not be used on snow-covered roads. According to most manufacturers, and even the law in most provinces, your tires should be replaced when the tread depth reaches 4/32” in the winter. If your tread depth wears to those levels, your tires are considered bald and a safety hazard.

HOW DO YOU CHECK THE TREAD DEPTH ON YOUR TIRES?

We’ve got three simple ways for you to check the tread depth on your tires:

1. With a toonie

Slip a toonie in between your tread blocks. If the tread reaches the bear’s paws, your tires have lots of tread left (they’re probably new!). If the silver part of the toonie is covered by the tread block, your tires are about half worn. And if the tread reaches only as far as the letters (‘CANADA’ or ‘DOLLARS’), your tires are worn and need to be replaced.

2. With tire tread wear indicators

Your tires may also have built-in tread wear indicators. They’re little raised bars—usually six on each tire—along your tires grooves that mark the minimum permitted tread depth. If these indicators are worn, replace your tires right away.

NokianBuildInTreadDepth

3. With a tire tread depth gauge

Tire tread depth gauges are a fast and easy way for you to know for sure if your tires are safe or if they need to be replaced. Tire tread depth gauges are available at most gas stations. Keep one in your glove compartment for easy access.

  1. Find the shallowest groove of the tread and insert the pin of the gauge until the base is flush with the tire.
  2. Read the scale. If you’ve got a number between 7 and 12/32” – you’re good for now! Any less, and you’ll be able to improve your winter braking and cornering with a new set.

Jan-13-Tread-Depth.jpg

Want to leave the tread depth checking to the experts? Visit one of our Kal Tire locations near you, and we’ll gladly measure your tread depth and give a recommendation.